Rhombicuboctahedron

"Expanded octahedron" redirects here. For the tensegrity structure, see Jessen's icosahedron.

Rhombicuboctahedron
Type	Archimedean Uniform polyhedron
Faces	8 equilateral triangles 18 squares
Edges	48
Vertices	24
Vertex configuration	$24(3\cdot 4^{3})$
Schläfli symbol	$r{\begin{Bmatrix}3\\4\end{Bmatrix}}$
Symmetry group	Octahedral symmetry $\mathrm {O} _{\mathrm {h} }$ Pyritohedral symmetry $\mathrm {T} _{\mathrm {h} }$
Dihedral angle (degrees)	square-to-square: 135° square-to-triangle: 144.7°
Dual polyhedron	Deltoidal icositetrahedron
Vertex figure
Net

In geometry, the rhombicuboctahedron is an Archimedean solid with 26 faces, consisting of 8 equilateral triangles and 18 squares. It was named by Johannes Kepler in his 1618 Harmonices Mundi, being short for truncated cuboctahedral rhombus, with cuboctahedral rhombus being his name for a rhombic dodecahedron.

The rhombicuboctahedron is an Archimedean solid, and its dual is a Catalan solid, the deltoidal icositetrahedron. The elongated square gyrobicupola is a polyhedron that is similar to a rhombicuboctahedron, but it is not an Archimedean solid because it is not vertex-transitive. The rhombicuboctahedron is found in diverse cultures in architecture, toys, the arts, and elsewhere.

Construction

The rhombicuboctahedron may be constructed from a cube by drawing a smaller one in the middle of each face, parallel to the cube's edges. After removing the edges of a cube, the squares may be joined by adding more squares adjacent between them, and the corners may be filled by the equilateral triangles. Another way to construct the rhombicuboctahedron is by attaching two regular square cupolas into the bases of a regular octagonal prism.

Process of expanding the rhombicuboctahedron.

A rhombicuboctahedron may also be known as an expanded octahedron or expanded cube. This is because the rhombicuboctahedron may also be constructed by separating and pushing away the faces of a cube or a regular octahedron from their centroid (in blue or red, respectively, in the animation), and filling between them with the squares and equilateral triangles. This construction process is known as expansion. By using all of these methods above, the rhombicuboctahedron has 8 equilateral triangles and 16 squares as its faces. Relatedly, the rhombicuboctahedron may also be constructed by cutting all edges and vertices of either cube or a regular octahedron, a process known as rectification.

Cartesian coordinates of a rhombicuboctahedron with an edge length 2 are the permutations of $\left(\pm \left(1+{\sqrt {2}}\right),\pm 1,\pm 1\right)$.

Properties

Measurement and metric properties

The surface area of a rhombicuboctahedron $A$ can be determined by adding the area of all faces: 8 equilateral triangles and 18 squares. The volume of a rhombicuboctahedron $V$ can be determined by slicing it into two square cupolas and one octagonal prism. Given that the edge length $a$, its surface area and volume is: $${\begin{aligned}A&=\left(18+2{\sqrt {3}}\right)a^{2}&\approx 21.464a^{2},\\V&={\frac {12+10{\sqrt {2}}}{3}}a^{3}&\approx 8.714a^{3}.\end{aligned}}$$

The optimal packing fraction of rhombicuboctahedra is given by $$\eta ={\frac {4}{3}}\left(4{\sqrt {2}}-5\right).$$ It was noticed that this optimal value is obtained in a Bravais lattice by de Graaf, van Roij & Dijkstra (2011). Since the rhombicuboctahedron is contained in a rhombic dodecahedron whose inscribed sphere is identical to its inscribed sphere, the value of the optimal packing fraction is a corollary of the Kepler conjecture: it can be achieved by putting a rhombicuboctahedron in each cell of the rhombic dodecahedral honeycomb, and it cannot be surpassed, since otherwise the optimal packing density of spheres could be surpassed by putting a sphere in each rhombicuboctahedron of the hypothetical packing which surpasses it.

The dihedral angle of a rhombicuboctahedron can be determined by adding the dihedral angle of a square cupola and an octagonal prism:

• the dihedral angle of a rhombicuboctahedron between two adjacent squares on both the top and bottom is that of a square cupola 135°. The dihedral angle of an octagonal prism between two adjacent squares is the internal angle of a regular octagon 135°. The dihedral angle between two adjacent squares on the edge where a square cupola is attached to an octagonal prism is the sum of the dihedral angle of a square cupola square-to-octagon and the dihedral angle of an octagonal prism square-to-octagon 45° + 90° = 135°. Therefore, the dihedral angle of a rhombicuboctahedron for every two adjacent squares is 135°.
• the dihedral angle of a rhombicuboctahedron square-to-triangle is that of a square cupola between those 144.7°. The dihedral angle between square-to-triangle, on the edge where a square cupola is attached to an octagonal prism is the sum of the dihedral angle of a square cupola triangle-to-octagon and the dihedral angle of an octagonal prism square-to-octagon 54.7° + 90° = 144.7°. Therefore, the dihedral angle of a rhombicuboctahedron for every square-to-triangle is 144.7°.

A rhombicuboctahedron has the Rupert property, meaning there is a polyhedron with the same or larger size that can pass through its hole.

Symmetry and its classification family

3D model of a rhombicuboctahedron

The rhombicuboctahedron has the same symmetry as a cube and regular octahedron, the octahedral symmetry $\mathrm {O} _{\mathrm {h} }$. However, the rhombicuboctahedron also has a second set of distortions with six rectangular and sixteen trapezoidal faces, which do not have octahedral symmetry but rather pyritohedral symmetry $\mathrm {T} _{\mathrm {h} }$, so they are invariant under the same rotations as the tetrahedron but different reflections. It is centrosymmetric, meaning its symmetric is interchangeable by the appearance of inversion center. It is also non-chiral; that is, it is congruent to its own mirror image.

The rhombicuboctahedron is an Archimedean solid, meaning it is a highly symmetric and semi-regular polyhedron, and two or more different regular polygonal faces meet in a vertex. The polygonal faces that meet for every vertex are one equilateral triangle and three squares, and the vertex figure is denoted as $3\cdot 4^{3}$. Its dual is deltoidal icositetrahedron, a Catalan solid, shares the same symmetry as the rhombicuboctahedron.

The elongated square gyrobicupola is the only polyhedron resembling the rhombicuboctahedron. The difference is that the elongated square gyrobicupola is constructed by twisting one of its cupolae. It was once considered as the 14th Archimedean solid, until it was discovered that it is not vertex-transitive, categorizing it as the Johnson solid instead.

Graph

The graph of a rhombicuboctahedron

The skeleton of a rhombicuboctahedron can be described as a polyhedral graph, meaning a graph that is planar and 3-vertex-connected. In other words, the edges of a graph are not crossed while being drawn, and removing any two of its vertices leaves a connected subgraph.

The rhombicuboctahedral graph has 24 vertices and 48 edges. It is quartic, meaning each of its vertices is connected to four others. This graph is classified as Archimedean graph, because it resembles the graph of Archimedean solid.

Appearances

Many rhombicuboctahedral objects such as National Library in Minsk in the commemorative image (top left) and Rubik's cube variation (top right). As well as the rhombicuboctahedron may appear in art, as in Portrait of Luca Pacioli (bottom left) and Leonardo da Vinci's 1509 illustration in Divina proportione (bottom right).

The rhombicuboctahedron appears in the architecture, with an example of the building being the National Library located at Minsk. The Wilson House is another example of the rhombicuboctahedron building, although its module was depicted as a truncated cube in which the edges are all cut off. It was built during the Second World War and Operation Breakthrough in the 1960s.

The rhombicuboctahedron may also be found in toys. For example, the lines along which a Rubik's Cube can be turned are, projected onto a sphere, similar, topologically identical, to a rhombicuboctahedron's edges. Variants using the Rubik's Cube mechanism have been produced, which closely resemble the rhombicuboctahedron. During the Rubik's Cube craze of the 1980s, at least two twisty puzzles sold had the form of a rhombicuboctahedron (the mechanism was similar to that of a Rubik's Cube) Another example may be found in dice from Corfe Castle, each of which square faces have marks of pairs of letters and pips.

The rhombicuboctahedron may also appear in art. An example is the 1495 Portrait of Luca Pacioli, traditionally attributed to Jacopo de' Barbari, which includes a glass rhombicuboctahedron half-filled with water, which may have been painted by Leonardo da Vinci. The first printed version of the rhombicuboctahedron was by Leonardo and appeared in Pacioli's Divina proportione (1509).

References

Works cited

• Berman, Martin (1971), "Regular-faced convex polyhedra", Journal of the Franklin Institute, 291 (5): 329–352, doi:10.1016/0016-0032(71)90071-8, MR 0290245.
• Chai, Ying; Yuan, Liping; Zamfirescu, Tudor (2018), "Rupert Property of Archimedean Solids", The American Mathematical Monthly, 125 (6): 497–504, doi:10.1080/00029890.2018.1449505, S2CID 125508192.
• Cockram, Bernice (2020), In Focus Sacred Geometry: Your Personal Guide, Wellfleet Press, ISBN 978-1-57715-225-5.
• Cromwell, Peter R. (1997), Polyhedra, Cambridge University Press, ISBN 978-0-521-55432-9.
• de Graaf, J.; van Roij, R.; Dijkstra, M. (2011), "Dense Regular Packings of Irregular Nonconvex Particles", Physical Review Letters, 107 (15): 155501, arXiv:1107.0603, Bibcode:2011PhRvL.107o5501D, doi:10.1103/PhysRevLett.107.155501, PMID 22107298, S2CID 14041658.
• Diudea, M. V. (2018), Multi-shell Polyhedral Clusters, Springer, doi:10.1007/978-3-319-64123-2, ISBN 978-3-319-64123-2.
• Gabriel, J. F. (1997), Beyond the Cube: The Architecture of Space Frames and Polyhedra, John Wiley & Sons, ISBN 978-0-471-12261-6.
• Gan, Buntara Sthenly (2020), Computational Modeling of Tensegrity Structures: Art, Nature, Mechanical and Biological Systems, Springer, doi:10.1007/978-3-030-17836-9, ISBN 978-3-030-17836-9.
• Grünbaum, Branko (2009), "An enduring error" (PDF), Elemente der Mathematik, 64 (3): 89–101, doi:10.4171/EM/120, MR 2520469.
• Hartshorne, Robin (2000), Geometry: Euclid and Beyond, Undergraduate Texts in Mathematics, Springer-Verlag, ISBN 9780387986500.
• Hoffmann, Balazs (2019), "Rupert properties of polyhedra and the generalized Nieuwland constant", Journal for Geometry and Graphics, 23 (1): 29–35
• Johnson, Norman W. (1966), "Convex polyhedra with regular faces", Canadian Journal of Mathematics, 18: 169–200, doi:10.4153/cjm-1966-021-8, MR 0185507, S2CID 122006114, Zbl 0132.14603
• Kepler, Johannes (1997), Harmony of the World, American Philosophical Society, ISBN 978-0-87169-209-2. This is translated into English by Aiton E. J., Duncan E. M., Field J. V.
• Koca, M.; Koca, N. O. (2013), "Coxeter groups, quaternions, symmetries of polyhedra and 4D polytopes", Mathematical Physics: Proceedings of the 13th Regional Conference, Antalya, Turkey, 27–31 October 2010, World Scientific.
• Lando, Sergei K.; Zvonkin, Alexander K. (2004), Graphs on Surfaces and Their Applications, Springer, p. 114, doi:10.1007/978-3-540-38361-1, ISBN 978-3-540-38361-1.
• Linti, G. (2013), "Catenated Compounds - Group 13 [Al, Ga, In, Tl]", in Reedijk, J.; Poeppelmmeier, K. (eds.), Comprehensive Inorganic Chemistry II: From Elements to Applications, Newnes.
• O'Keeffe, Michael; Hyde, Bruce G. (2020), Crystal Structures: Patterns and Symmetry, Dover Publications, ISBN 978-0-486-83654-6.
• Read, R. C.; Wilson, R. J. (1998), An Atlas of Graphs, Oxford University Press.
• Shepherd, G. C. (1954), "A Construction for Wythoffian Polytopes", Canadian Journal of Mathematics, 6 (128–134), doi:10.4153/CJM-1954-015-5.
• Viana, Vera; Xavier, João Pedro; Aires, Ana Paula; Campos, Helena (2019), "Interactive Expansion of Achiral Polyhedra", in Cocchiarella, Luigi (ed.), ICGG 2018 - Proceedings of the 18th International Conference on Geometry and Graphics 40th Anniversary - Milan, Italy, August 3-7, 2018, Springer, doi:10.1007/978-3-319-95588-9, ISBN 978-3-319-95587-2.
• Williams, Robert (1979), The Geometrical Foundation of Natural Structure: A Source Book of Design, Dover Publications, Inc.

See also

• Truncated rhombicuboctahedron
• Moravian star
• Chamfered cube, obtained by augmenting the triangles to obtain non-uniform hexagon faces

Further reading

• Cromwell, P. (1997). Polyhedra. United Kingdom: Cambridge. pp. 79–86 Archimedean solids. ISBN 0-521-55432-2.
• Coxeter, H.S.M.; Longuet-Higgins, M.S.; Miller, J.C.P. (May 13, 1954). "Uniform Polyhedra". Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences. 246 (916): 401–450. Bibcode:1954RSPTA.246..401C. doi:10.1098/rsta.1954.0003. S2CID 202575183.
• Betke, U.; Henk, M. (2000), "Densest Lattice Packings of 3-Polytopes", Computational Geometry, 16 (3): 157–186, arXiv:math/9909172, doi:10.1016/S0925-7721(00)00007-9
• Torquato, S.; Jiao, Y. (2009), "Dense packings of the Platonic and Archimedean solids", Nature, 460 (7257): 876–879, arXiv:0908.4107, Bibcode:2009Natur.460..876T, doi:10.1038/nature08239, PMID 19675649, S2CID 52819935
• Hales, Thomas C. (2005), "A proof of the Kepler conjecture", Annals of Mathematics, 162 (3): 1065–1185, arXiv:math/9811078v2, doi:10.4007/annals.2005.162.1065

External links

• Weisstein, Eric W., "Rhombicuboctahedron" ("Archimedean solid") at MathWorld.
  • Weisstein, Eric W. "Small rhombicuboctahedral graph". MathWorld.
• Klitzing, Richard. "3D convex uniform polyhedra x3o4x - sirco".
• The Uniform Polyhedra
• Virtual Reality Polyhedra The Encyclopedia of Polyhedra
• Editable printable net of a rhombicuboctahedron with interactive 3D view
• Rhombicuboctahedron Star by Sándor Kabai, Wolfram Demonstrations Project.
• Rhombicuboctahedron: paper strips for plaiting